DIY Monster Softie

Standard

by Distractions

You will need:

1. Your monster pattern
2. Fabric marker
3. Scissors
4. Sewing machine
5. Hand sewing needle
6. Matching thread
7. Stuffing (*note: a 12oz bag will stuff about a dozen monsters if not more)
8. Fabric for your body and for the features  – I made mine out of felt and used  embroidery floss for the features

How to Make a Monster Softie

  1. Trace out your monster on your material with your fabric marker.  I used felt for my project but you can use almost any type of fabric for this project. 
  2. Pin together your fabric around the outline of the monster so your fabric does not shift when you cut out your monster.
  3. Next, create the features of the monster. Cut and attach them to the front side of the monster.  When I attached the facial features I went overboard and glued them on, let them dry and then sewed them on by hand once they were dry.  When I glued my felt features I tried to avoid putting the glue close to the edge because once it dries it is hard and difficult to sew through.  I used felt glue for my project but you can also find fabric glue if you chose not to use felt for your monster softie.
  4. Determine the best place to leave the opening (for turning your monster right side out).  Starting from the end of the opening, sew around the edge of your monster and stopping at the other end of the opening.  Sew slowly especially if your monster has a lot of curves.  After your sewn around the perimeter (minus the opening area) inspect the reverse side and sew over any areas that may not have been sewn properly the first time.  I had to do this in the curved areas because the felt would get caught in the feeder feet.
  5. Turn your monster right side out.  With my red monster I had to leave two openings, one for reversing and stuffing and the other because it was difficult to sew and turn the antennas.  I hand sewed the inside part of the antennas and stuffed the red monster through the bottom opening.  With the other monsters I only needed to leave one opening on the bottom for turning and stuffing.
  6. Try not to over stuff your monster (you don’t want the seams to explode during playtime).  If your bag of filling does not include a stick for stuffing, you can use a spare chop stick to push the stuffing gently into the small parts of the monster.  Once your monster has been stuffed, sew up the opening using a blanket stitch and clip the end of the thread as close to your knot as possible.               
  7. Yeah you have a finished monster!!!

More info and tips can be found at Ashley’s blog, Distractions.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s